kobebeefg / ikea-clock-lab

# IKEA KORTLINJE 面板改造與 Wi-Fi 時鐘 / Panel Hack & Wi-Fi Clock
我用 **Seeed Studio XIAO ESP32 C6** 接管原機的 42×9 LED 面板。你可以只用它顯示自己的圖案，也可以裝上我做好的 Wi-Fi 時鐘。
I use a **Seeed Studio XIAO ESP32 C6** to take over the original 42×9 LED panel. You can display your own patterns or use my finished Wi-Fi clock.
> 這項改造需要拆除小型 SMD 電阻，並在細小焊盤上焊線。我建議有 SMD 焊接經驗的人操作，拆焊與剪線前先斷電。
>
> This modification requires removing small SMD resistors and soldering wires to tiny pads. I recommend it for people with SMD soldering experience. Disconnect power before desoldering or cutting wires.
| 先看哪裡 / Start here | 內容 / What you will find |
|---|---|
| 硬體改造教學 / Hardware guide | LED 接線、D44 二極體、選配的按鍵與蜂鳴器，以及所需照片。 LED wiring, the D44 diode, optional buttons and buzzer, and the relevant photos. |
| Basic Display | 只接管面板顯示圖案；不需要 Wi-Fi、按鍵或時鐘功能。 Display your own patterns without Wi-Fi, buttons, or clock features. |
| Wi-Fi Clock | 完成版程式、首次連網，以及網頁和實體按鍵操作。 The complete firmware, first-time Wi-Fi setup, web controls, and physical buttons. |
我建議先看硬體教學，再選擇要上傳哪一份程式。你可以把這個 GitHub 專案連結貼給 AI，告訴它你選的程式和開發板 **XIAO ESP32 C6**，請它協助安裝套件、上傳或修改用途。你也可以自行使用 Arduino IDE 上傳。
I recommend reading the hardware guide first, then choosing which program to upload. You can give this GitHub link to an AI assistant, specify the program and **XIAO ESP32 C6** board, and ask for help installing libraries, uploading, or adapting the project. You can also upload it yourself with Arduino IDE.
本專案使用 Arduino-ESP32、ArduinoJson、Open-Meteo 與 Clock Pixel 9 字型。字型的上游紀錄 / upstream record和 SIL OFL 1.1 授權 / license隨程式保留。Bad Apple 黑白影格的來源紀錄為 SillyTavern-BadApple 影片 / video。本儲存庫未指定整體開源授權。
This project uses Arduino-ESP32, ArduinoJson, Open-Meteo, and the Clock Pixel 9 font. The font's upstream record and SIL OFL 1.1 license are included above; the linked SillyTavern-BadApple video records the source of the monochrome frames. No license has been specified for the repository as a whole.